• Quantity:
Discount:
Shipping(in case you do not know your zone we suggest you to chose a casual zone and in the following steps the system is going to recognize your area and tell you the one to chose).:
Payment:
In case you are not supposed to pay VAT value, this amount will be cut off in the following stages of the order. VAT:
Total: to quote
Cart is empty.

tenditori automatici per catene e cinghie

AUTOMATIC CHAIN TENSIONERS TYPE TRP

AUTOMATIC CHAIN TENSIONERS TYPE TRP
  1. 1
    CHAIN TENSIONER TRP1 oval head Newton50:200-50:210-30:175
    Types TRP1 and TRP2 have a light alloy body and a zinc-coated lever plus PE1000 UHMW tensioning head.
  2. 2
    CHAIN TENSIONER TRP1 round head Newton50:200-50:210-30:175
    Types TRP1 and TRP2 have a light alloy body and a zinc-coated lever plus PE1000 UHMW tensioning head.
  3. 3
    CHAIN TENSIONER TRP2 oval head Newton120:480
    Types TRP1 and TRP2 have a light alloy body and a zinc-coated lever plus PE1000 UHMW tensioning head.
  4. 4
    CHAIN TENSIONER TRP2 round head Newton120:480
    Types TRP1 and TRP2 have a light alloy body and a zinc-coated lever plus PE1000 UHMW tensioning head.

ROTARY AUTOMATIC CHAIN TENSIONERS TRP

INDUSTRIAL ROTARY CHAIN AND BELT TENSIONERS-SINCE 1979! 

Automatic tensioners are automatic devices which allow to keep the right tension of the transmission chain so it lasts longer.

In addition they recover the stretching that the chain has little by little during its functioning.

So thanks to the automatic tensioners you can avoid vibrations and noise linked to functioning.

These automatic tensioners do not need the intervention of any workers so you can save time for the maintenance and for the control of the machineries on which they are set up. 

Types TRP1 and TRP2 have a light alloy body and a zinc-coated lever plus PE1000 UHMW tensioning head. 

They have the body and the lever made of a special anti-seize light alloy perfect for this use. They have a perfect sliding of the lever on the zinc-coated central pivot.

The central pivot and the two basis have OR seals used to avoid external agents infiltrations.

The internal elastic element made of high yield point steel and with initial pre-load allow us to get  a very steady pressure excursion .

TR versatility is due to the possibility to change the levers so to get various heights without losing  rigidity.

For type TR1 we have lever 110,111,115,118 and for type TR2  the levers 210,218,227.

The levers have a bore and you can chose the type of bore . The position of the bore is perfect to have room enough to set up accessories and keep the same loads of the elastic elements. By this way the product have a very long life expectancy.

The set up is very simple as they can be fixed on the machine using an internal or external screw.

They have a retainer loop to block the rotation.

Tensioning useful angle 45°TR2 and 60°TR1 in both sense of rotation.

They have  a anti-seize plastic head with low friction coefficient ( Polyethylene 1000 dynamic friction coefficient 0,06 dry steel).

They can work with temperatures up to 80° C. 

Therefore 

- Steady chain / belt tensioning

- Noises reduction

-  Best transmission performance

- Less ware and tear

- Cheapness and easy set up 

They are set up one by one by skilled staff to get the best quality control and the perfect pivots sliding.

The high quality materials, the manufacture and the endurance of the elements processed by our CNC machineries, allow the product to work properly and have a long life expectancy. 

The simple use and the cheapness make this product a cheap, practical and safe one.