ROTARY TENSIONER - TR

ROTARY TENSIONER - TR

ZETASASSI® ROTARY AUTOMATIC DRIVE TENSIONER - TR

  • ROTARY DRIVE TENSIONER TR1
  • ROTARY DRIVE TENSIONER TR2
  • ROTARY DRIVE TENSIONER TRP
  • ROTARY DRIVE TENSIONER TRPU
  • ROTARY DRIVE TENSIONER TRPUG
  • ROTARY DRIVE TENSIONER TRR

AUTOMATIC ROTATING AND ROTARY SPRING-ACTION TENSIONERS

TR rotary tensioners are automatic devices that serve to maintain the correct tension of the transmission chain or belt, thereby increasing their durability.

They automatically recover any slack in the chain or belt that may develop with use, preventing the appearance of vibrations, noise and breakage due to slack.

These automatic tensioners do not require any kind of upkeep and make it possible to save time on maintenance and management of the machinery on which they are installed.

The TR1 and TR2 models consist of a base and lever in special, very sturdy, antiseize aluminum with tensile strength of 440MPa, which ensures perfect glide of the lever and central fastening rod in high tensile strength galvanized steel.Elastic elements in steel with a very high yield point and initial preload are inserted in the tensioners, ensuring the most constant pressure range possible. In addition, the specific mechanical properties of the material prevent wear on the elastic internal elements due to movement, so we are able to supply a product of absolute excellence in this field.

The load lever in galvanized steel is mounted on the end of the base cap.

The versatility of the TR models is due to the possibility to change the load lever so as to reach any height without losing in rigidity. They have interchangeable 110,111,115,118 levers for the type 1 and 210,218,227 levers for the type 2.

They are characterized in particular by the fact that O-rings are mounted on the inside to prevent infiltrations, so they have an excellent watertight seal.

All rotating TR tensioners have a tensioning angle of over 45° in both directions of rotation.

They are easy to install, because they can be fastened to the machine either with screws from the inside or from the outside, with rear stop slots to block rotation on imperfect or irregular surfaces.

They can be supplied with chain tensioning shoes in polyethylene 1,000,000 UHMW with dynamic dry steel friction coefficient 0,06, chain tensioning pinions, belt tensioning rollers and idle pulleys.

 

  1. ROTARY TENSIONER - TR  with hole
  2. ROTARY CHAIN TENSIONER - TRP with chain slider
  3. ROTARY CHAIN TENSIONER - TRPAT with chain slider
  4. ROTARY BELT TENSIONER - TRPU with idler roller
  5. ROTARY BELT TENSIONER - TRPUG with rim pulley
  6. ROTARY CHAIN TENSIONER - TR idler sprocket
  7. LEVER FOR CHAIN AND BELT TENSIONER TR
  1. 1
    LEVER TR1 110 FOR ROTARY DRIVE TENSIONER - HOLE Ø10,5mm
    Price:
    €6.60
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  2. 2
    LEVER TR1 110 FOR ROTARY DRIVE TENSIONER - HOLE Ø12,5mm
    Price:
    €6.60
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  3. 3
    LEVER TR1 110 FOR ROTARY DRIVE TENSIONER - HOLE Ø6,5mm
    Price:
    €5.30
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  4. 4
    LEVER TR1 110 FOR ROTARY DRIVE TENSIONER - HOLE Ø8,5mm
    Price:
    €6.60
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  5. 5
    LEVER TR1 111 FOR ROTARY DRIVE TENSIONER - HOLE Ø10,5mm
    Price:
    €6.60
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  6. 6
    LEVER TR1 111 FOR ROTARY DRIVE TENSIONER - HOLE Ø12,5mm
    Price:
    €6.60
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  7. 7
    LEVER TR1 111 FOR ROTARY DRIVE TENSIONER - HOLE Ø8,5mm
    Price:
    €5.30
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  8. 8
    LEVER TR1 115 FOR ROTARY DRIVE TENSIONER - HOLE Ø10,5mm
    Price:
    €5.30
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  9. 9
    LEVER TR1 115 FOR ROTARY DRIVE TENSIONER - HOLE Ø12,5mm
    Price:
    €6.60
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  10. 10
    LEVER TR1 118 FOR ROTARY DRIVE TENSIONER - HOLE Ø10,5mm
    Price:
    €5.90
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  11. 11
    LEVER TR1 118 FOR ROTARY DRIVE TENSIONER - HOLE Ø12,5mm
    Price:
    €7.00
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  12. 12
    LEVER TR2 210 FOR ROTARY DRIVE TENSIONER - HOLE Ø10,5mm
    Price:
    €7.40
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  13. 13
    LEVER TR2 210 FOR ROTARY DRIVE TENSIONER - HOLE Ø12,5mm
    Price:
    €9.00
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  14. 14
    LEVER TR2 218 FOR ROTARY DRIVE TENSIONER - HOLE Ø10,5mm
    Price:
    €7.40
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  15. 15
    LEVER TR2 218 FOR ROTARY DRIVE TENSIONER - HOLE Ø12,5mm
    Price:
    €9.00
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  16. 16
    LEVER TR2 227 FOR ROTARY DRIVE TENSIONER - HOLE Ø12,5mm
    Price:
    €9.20
    TR versatility is due to the possibility to change the levers so to get various heights without losing rigidity. For type TR1 we have lever 110,111,115,118 and for type TR2 the levers 210,218,227.
  17. 17
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø30xL35 in aluminum Lever 110 N50:200
    Price:
    €35.60
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø30 x L35 m\m made of aluminum (Made in Italy)
  18. 18
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø30xL35 in aluminum Lever 111 N50:210
    Price:
    €34.30
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø30 x L35 m\m made of aluminum (Made in Italy)
  19. 19
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø30xL35 in nylon Lever 110 N50:200
    Price:
    €33.70
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø30 x L35 m\m made of nylon (Made in Italy)
  20. 20
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø30xL35 in nylon Lever 111 N50:210
    Price:
    €32.50
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø30 x L35 m\m made of nylon (Made in Italy)
  21. 21
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø30xL35 in zinc-coated steel Lever 110 N50:200
    Price:
    €35.80
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø30 x L35 m\m made of zinc-coated steel (Made in Italy)
  22. 22
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø30xL35 in zinc-coated steel Lever 111 N50:210
    Price:
    €34.60
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø30 x L35 m\m made of zinc-coated steel (Made in Italy)
  23. 23
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø40xL45 in nylon Lever 110 N50:200
    Price:
    €35.10
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø40 x L45 m\m made of nylon (Made in Italy)
  24. 24
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø40xL45 in nylon Lever 111 N50:210
    Price:
    €35.10
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø40 x L45 m\m made of nylon (Made in Italy)
  25. 25
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø40xL45 in nylon Lever 115 N30:175
    Price:
    €33.90
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 115 Newton 30:175 equipped idler roller with bearings Ø40 x L45 m\m made of nylon (Made in Italy)
  26. 26
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø40xL45 in nylon Lever 118 N30:175
    Price:
    €34.40
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 118 Newton 30:175 equipped idler roller with bearings Ø40 x L45 m\m made of nylon (Made in Italy)
  27. 27
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø50xL50 in aluminum Lever 110 N50:200
    Price:
    €38.40
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø50 x L50 m\m made of aluminum (Made in Italy)
  28. 28
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø50xL50 in aluminum Lever 111 N50:210
    Price:
    €38.40
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø50 x L50 m\m made of aluminum (Made in Italy)
  29. 29
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø50xL50 in aluminum Lever 115 N30:175
    Price:
    €38.40
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 115 Newton 30:175 equipped idler roller with bearings Ø50 x L50 m\m made of aluminum (Made in Italy)
  30. 30
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø50xL50 in aluminum Lever 118 N30:175
    Price:
    €38.80
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 118 Newton 30:175 equipped idler roller with bearings Ø50 x L50 m\m made of aluminum (Made in Italy)
  31. 31
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø50xL50 in nylon Lever 110 N50:200
    Price:
    €35.10
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø50 x L50 m\m made of nylon (Made in Italy)
  32. 32
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø50xL50 in nylon Lever 111 N50:210
    Price:
    €35.10
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø50 x L50 m\m made of nylon (Made in Italy)
  33. 33
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø50xL50 in nylon Lever 115 N30:175
    Price:
    €35.10
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 115 Newton 30:175 equipped idler roller with bearings Ø50 x L50 m\m made of nylon (Made in Italy)
  34. 34
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø50xL50 in nylon Lever 118 N30:175
    Price:
    €35.60
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 118 Newton 30:175 equipped idler roller with bearings Ø50 x L50 m\m made of nylon (Made in Italy)
  35. 35
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø50xL50 in zinc-coated steel Lever 110 N50:200
    Price:
    €41.30
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø50 x L50 m\m made of zinc-coated steel (Made in Italy)
  36. 36
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø50xL50 in zinc-coated steel Lever 111 N50:210
    Price:
    €41.30
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø50 x L50 m\m made of zinc-coated steel (Made in Italy)
  37. 37
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø50xL50 in zinc-coated steel Lever 115 N30:175
    Price:
    €41.30
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 115 Newton 30:175 equipped idler roller with bearings Ø50 x L50 m\m made of zinc-coated steel (Made in Italy)
  38. 38
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø50xL50 in zinc-coated steel Lever 118 N30:175
    Price:
    €41.70
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 118 Newton 30:175 equipped idler roller with bearings Ø50 x L50 m\m made of zinc-coated steel (Made in Italy)
  39. 39
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø60xL60 in aluminum Lever 110 N50:200
    Price:
    €42.80
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø60 x L60 m\m made of aluminum (Made in Italy)
  40. 40
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø60xL60 in aluminum Lever 111 N50:210
    Price:
    €42.80
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø60 x L60 m\m made of aluminum (Made in Italy)
  41. 41
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø60xL60 in aluminum Lever 115 N30:175
    Price:
    €42.80
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 115 Newton 30:175 equipped idler roller with bearings Ø60 x L60 m\m made of aluminum (Made in Italy)
  42. 42
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø60xL60 in aluminum Lever 118 N30:175
    Price:
    €43.30
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 118 Newton 30:175 equipped idler roller with bearings Ø60 x L60 m\m made of aluminum (Made in Italy)
  43. 43
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø60xL60 in nylon Lever 110 N50:200
    Price:
    €38.50
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø60 x L60 m\m made of nylon (Made in Italy)
  44. 44
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø60xL60 in nylon Lever 111 N50:210
    Price:
    €38.50
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø60 x L60 m\m made of nylon (Made in Italy)
  45. 45
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø60xL60 in nylon Lever 115 N30:175
    Price:
    €38.50
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 115 Newton 30:175 equipped idler roller with bearings Ø60 x L60 m\m made of nylon (Made in Italy)
  46. 46
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø60xL60 in nylon Lever 118 N30:175
    Price:
    €38.90
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 118 Newton 30:175 equipped idler roller with bearings Ø60 x L60 m\m made of nylon (Made in Italy)
  47. 47
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø60xL60 in zinc-coated steel Lever 110 N50:200
    Price:
    €43.30
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø60 x L60 m\m made of zinc-coated steel (Made in Italy)
  48. 48
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø60xL60 in zinc-coated steel Lever 111 N50:210
    Price:
    €43.30
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø60 x L60 m\m made of zinc-coated steel (Made in Italy)
  49. 49
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø60xL60 in zinc-coated steel Lever 115 N30:175
    Price:
    €43.30
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 115 Newton 30:175 equipped idler roller with bearings Ø60 x L60 m\m made of zinc-coated steel (Made in Italy)
  50. 50
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø60xL60 in zinc-coated steel Lever 118 N30:175
    Price:
    €43.70
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 118 Newton 30:175 equipped idler roller with bearings Ø60 x L60 m\m made of zinc-coated steel (Made in Italy)
  51. 51
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL80 in aluminum Lever 110 N50:200
    Price:
    €54.50
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø80 x L80 m\m made of aluminum (Made in Italy)
  52. 52
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL80 in aluminum Lever 111 N50:210
    Price:
    €54.50
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø80 x L80 m\m made of aluminum (Made in Italy)
  53. 53
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL80 in aluminum Lever 115 N30:175
    Price:
    €54.50
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 115 Newton 30:175 equipped idler roller with bearings Ø80 x L80 m\m made of aluminum (Made in Italy)
  54. 54
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL80 in aluminum Lever 118 N30:175
    Price:
    €54.90
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 118 Newton 30:175 equipped idler roller with bearings Ø80 x L80 m\m made of aluminum (Made in Italy)
  55. 55
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL80 in nylon Lever 110 N50:200
    Price:
    €49.10
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø80 x L80 m\m made of nylon (Made in Italy)
  56. 56
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL80 in nylon Lever 111 N50:210
    Price:
    €49.10
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø80 x L80 m\m made of nylon (Made in Italy)
  57. 57
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL80 in nylon Lever 115 N30:175
    Price:
    €49.10
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 115 Newton 30:175 equipped idler roller with bearings Ø80 x L80 m\m made of nylon (Made in Italy)
  58. 58
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL80 in nylon Lever 118 N30:175
    Price:
    €49.60
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 118 Newton 30:175 equipped idler roller with bearings Ø80 x L80 m\m made of nylon (Made in Italy)
  59. 59
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL80 in zinc-coated steel Lever 110 N50:200
    Price:
    €54.50
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø80 x L80 m\m made of zinc-coated steel (Made in Italy)
  60. 60
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL80 in zinc-coated steel Lever 111 N50:210
    Price:
    €54.50
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø80 x L80 m\m made of zinc-coated steel (Made in Italy)
  61. 61
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL80 in zinc-coated steel Lever 115 N30:175
    Price:
    €54.50
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 115 Newton 30:175 equipped idler roller with bearings Ø80 x L80 m\m made of zinc-coated steel (Made in Italy)
  62. 62
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL80 in zinc-coated steel Lever 118 N30:175
    Price:
    €54.90
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 118 Newton 30:175 equipped idler roller with bearings Ø80 x L80 m\m made of zinc-coated steel (Made in Italy)
  63. 63
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL90 in aluminum Lever 110 N50:200
    Price:
    €58.90
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø80 x L90 m\m made of aluminum (Made in Italy)
  64. 64
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL90 in aluminum Lever 111 N50:210
    Price:
    €58.90
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø80 x L90 m\m made of aluminum (Made in Italy)
  65. 65
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL90 in aluminum Lever 115 N30:175
    Price:
    €58.90
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 115 Newton 30:175 equipped idler roller with bearings Ø80 x L90 m\m made of aluminum (Made in Italy)
  66. 66
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL90 in aluminum Lever 118 N30:175
    Price:
    €59.40
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 118 Newton 30:175 equipped idler roller with bearings Ø80 x L90 m\m made of aluminum (Made in Italy)
  67. 67
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL90 in nylon Lever 110 N50:200
    Price:
    €52.10
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø80 x L90 m\m made of nylon (Made in Italy)
  68. 68
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL90 in nylon Lever 111 N50:210
    Price:
    €52.10
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø80 x L90 m\m made of nylon (Made in Italy)
  69. 69
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL90 in nylon Lever 115 N30:175
    Price:
    €52.10
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 115 Newton 30:175 equipped idler roller with bearings Ø80 x L90 m\m made of nylon (Made in Italy)
  70. 70
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL90 in nylon Lever 118 N30:175
    Price:
    €52.50
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 118 Newton 30:175 equipped idler roller with bearings Ø80 x L90 m\m made of nylon (Made in Italy)
  71. 71
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL90 in zinc-coated steel Lever 110 N50:200
    Price:
    €58.90
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 110 Newton 50:200 equipped idler roller with bearings Ø80 x L90 m\m made of zinc-coated steel (Made in Italy)
  72. 72
    ROTARY DRIVE BELT TENSIONER TR1PU equipped idler roller with bearings Ø80xL90 in zinc-coated steel Lever 111 N50:210
    Price:
    €58.90
    Rotary belt tensioner type TR1PU ZETASASSI® with lever 111 Newton 50:210 equipped idler roller with bearings Ø80 x L90 m\m made of zinc-coated steel (Made in Italy)